購物車沒有加入任何商品
× 
●產品特色: 快速施作、使板金玻璃表面增加疏水防護層、雨天快速排水、增強表面光亮、減少粉塵石粒髒污附著、降低酸雨鳥屎漆面損傷、清潔表面更加快速、安全不傷車漆。
●產品效用: 為汽機車玻璃板金燈殼鍍上一層防護亮膜，減少雨水粉塵髒污吸附。
● Product Features:
Quick application; creates a hydrophobic protective layer on bodywork and glass surfaces; facilitates rapid water drainage during rain; enhances surface gloss; reduces adhesion of dust, grit, and dirt; minimizes paint damage from acid rain and bird droppings; makes future cleaning faster; safe and non-damaging to vehicle paint.
● Product Function:
Applies a protective, glossy coating to automotive glass, bodywork, and light housings, reducing the accumulation of rainwater, dust, and dirt.
●商品名稱：除垢隊長 玻璃板金 水式鍍膜劑 汽機車專用
●容量：4000g
●酸鹼性: 酸性
●成份：水、高分子鍍膜劑、疏水劑。
●製造產地：台灣製造
●保存期限：5年
●工廠登記編號：66008416
●總經銷代理：好頭家創業股份有限公司
●產品特色: 快速施作、使板金玻璃表面增加疏水防護層、雨天快速排水、增強表面光亮、減少粉塵石粒髒污附著、降低酸雨鳥屎漆面損傷、清潔表面更加快速、安全不傷車漆。
●產品效用: 為汽機車玻璃板金燈殼鍍上一層防護亮膜，減少雨水粉塵髒污吸附。
●使用參考: 汽機車板金、擋風玻璃、天窗、車殼、燈殼、鏡面。
●使用方法:將汽機車表面先使用車用清潔劑表面污垢清水清潔乾淨並用抹布擦乾後，再將鍍膜劑均勻噴灑在汽車板金表面，使用車用海綿來回均勻塗抹後沖洗，再次使用清潔劑清潔表面，刷洗乾淨並用抹布擦乾即可。
※如表面沖水有滑水效果，既形成表面防護層，可減少髒污附著，如有雨水時，車輛高速行駛將藉由風速讓水滴滑落。
注意事項
1.請存放於陰涼及孩童不易拿取處，若不慎誤食請諮詢醫師協助。
2.若不慎噴到眼睛，請立即+用大量清水洗淨，或諮詢醫師協助。
3.本產品建議戴手套、口罩使用。
4.如有白色膏狀沈澱物屬自然現象，使用前搖一搖即可溶於清潔劑中使用。
5.不宜風強、陽光下使用，水份易瞬間蒸發乾掉來不及沖水以致乳白結塊表面。
6.溫度較高時，容易起霧為正常現象，當通風後溫度及濕度降低，冷水沖洗或擦拭即可除霧。
7.如材質表面或沾到皮膚，會感覺油膩感，如要恢復或清潔乾淨， 可使用肥皂去除。
● Product Name: "Clean Captain" – Water-based Coating Agent for Automotive Bodywork & Glass
● Capacity: 4000g
● pH Level: Acidic
● Ingredients: Water, polymer coating agent, hydrophobic agent.
● Place of Manufacture: Taiwan
● Shelf Life: 5 years
● Factory Registration No.: 66008416
● General Distributor: Good Boss Venture Co., Ltd.
● Product Features:
Quick application; creates a hydrophobic protective layer on bodywork and glass surfaces; facilitates rapid water drainage during rain; enhances surface gloss; reduces adhesion of dust, grit, and dirt; minimizes paint damage from acid rain and bird droppings; makes future cleaning faster; safe and non-damaging to vehicle paint.
● Product Function:
Applies a protective, glossy coating to automotive glass, bodywork, and light housings, reducing the accumulation of rainwater, dust, and dirt.
● Suitable For:
Automotive bodywork, windshields, sunroofs, vehicle shells, light housings, and mirrors.
● Usage Instructions:
First, clean the vehicle surface with automotive detergent and water to remove dirt, then wipe dry. Evenly spray the coating agent onto the bodywork surface. Spread evenly using an automotive sponge, then rinse. Clean the surface again with detergent, scrub thoroughly, and wipe dry.
※ If water beads or slides off during rinsing, a protective layer has formed, reducing dirt adhesion. During rain, wind speed while driving at high speeds will cause water droplets to slide off.
Precautions
1. Store in a cool place out of the reach of children. If accidentally ingested, seek medical advice.
2. If accidentally sprayed into the eyes, rinse immediately with plenty of water or seek medical advice.
3. It is recommended to wear gloves and a mask when using this product.
4. White paste-like sediment is a natural phenomenon; simply shake the bottle before use to dissolve it into the solution.
5. Do not use in strong winds or direct sunlight; moisture may evaporate too quickly to rinse, potentially causing milky-white clumps to form on the surface. 6. Fogging may occur at higher temperatures; this is normal. Once ventilation lowers the temperature and humidity, the fog can be removed by rinsing with cold water or wiping the surface.
7. If the material comes into contact with the skin, it may feel greasy; soap can be used to clean it off or restore the surface.
