除垢隊長 CLEAN CAPTAIN｜官方網站｜矽利康膠條 除霉清潔劑4000g 專業泡沫款 台灣製 Silicone Mold Remover 4000g – Professional Foam Formula | Made in Taiwan

●商品名稱：除垢隊長 矽利康膠條除霉清潔劑 專業泡沫款-DOUBLE PLUS

●容量：4000g

● 酸鹼性：鹼性

●成份：水、強效去霉劑、海鹽、次氯酸鈉、奈米增泡劑、椰子油起泡劑、柑橘精油。

●製造產地：台灣製造

●保存期限：5年

●工廠登記編號：66008416

●總經銷代理：好頭家創業股份有限公司

●產品特色:

強效去除矽利康膠條、磁磚縫黑霉垢、採奈米泡沫設計、深層分解表面霉根霉垢、無添加石化溶劑、塑化劑、防腐劑、甲醛殘留、無化學刺鼻味、輕鬆去霉垢、99.9%殺菌抑菌。

●產品效用: 針對表面矽膠、矽利康條、磁磚縫、牆壁漆面、塑膠、乾濕分離玻璃、布料等材質表面黑霉垢，有效分解霉菌除根淡化去除，殺菌抑菌之效果。

●使用參考: 矽利康矽膠、膠條、牆壁、板材、磁磚縫、窗戶、玻璃、拉門、落地窗 、廚房檯面、水槽、流理槽、馬桶、廚具、裝潢、衛浴設備、洗衣機、排水孔、採光罩、鏡面、浴缸、保鮮盒等防水處之表面等霉垢。

●使用方法:先將清潔劑噴頭轉開後，針對霉垢表面使用本清潔劑噴出泡沫完全覆蓋霉根後，依霉垢輕重情況，靜待數小時或1日後，使用刷布刷洗淡化黑霉垢，如較頑強霉垢，可再重複數次後，使用清水沖淨擦乾即可。

注意事項

◆ 本產品請勿使用或噴灑於鋁、銅、銀製品、五金配件等，避免造成表面氧化。

◆ 嚴禁與鹽酸、酸性物質清潔劑一起使用及使用高溫熱水沖淨，避免釋出有害氣體造成危險。

◆ 使用本產品若接觸到皮膚，會呈現乾澀，建議戴上手套後再使用。

◆ 本產品請於通風良好情況下使用，如有疑慮可再配戴口罩。

◆ 如有不慎誤入眼睛、皮膚傷口時，請立即大量清水沖洗，如感到不適請立即就醫。

◆ 請置於陰涼及孩童不易拿取處，不慎誤食時，請立即諮詢醫師協助。

◆ 本產品泡沫之效果，需搭配本公司專用泡沫噴槍，才可呈現噴出泡沫效果。

◆使用本清潔劑於部分材質可能不耐酸鹼，使用前請先確認，避免表面損害。

● Product Name: "Captain Descaler" Silicone Sealant & Grout Mold Remover (Professional Foam Formula) - DOUBLE PLUS

● Volume: 4000g

● pH Level: Alkaline

● Ingredients: Water, powerful mold remover, sea salt, sodium hypochlorite, nano-foaming agent, coconut oil-based foaming agent, citrus essential oil.

● Place of Manufacture: Taiwan

● Shelf Life: 5 years

● Factory Registration No.: 66008416

● General Distributor: Good Boss Venture Co., Ltd.

● Product Features:

Effectively removes black mold stains from silicone sealant strips and tile grout; features a nano-foam design that deeply breaks down mold roots and surface grime; free from petrochemical solvents, plasticizers, preservatives, and formaldehyde residues; no harsh chemical odors; easily removes mold; 99.9% bactericidal and bacteriostatic effect.

● Product Efficacy:

Targets black mold stains on surfaces such as silicone, sealant strips, tile grout, painted walls, plastic, shower glass partitions, and fabrics; effectively breaks down mold, eliminates roots, fades and removes stains, and provides bactericidal and bacteriostatic protection.

● Recommended Uses:

Removes mold stains from waterproof surfaces including silicone sealant, sealant strips, walls, panels, tile grout, windows, glass, sliding doors, floor-to-ceiling windows, kitchen countertops, sinks, toilets, kitchenware, interior fixtures, bathroom equipment, washing machines, drains, skylights, mirrors, bathtubs, food storage containers, etc.

● Instructions:

Turn the nozzle to open; spray the foam to completely cover the moldy area. Depending on the severity of the mold, let it sit for several hours or up to a day. Scrub with a brush or sponge to remove the faded black mold stains. For stubborn stains, repeat the process as needed, then rinse thoroughly with water and wipe dry.

Precautions

◆ Do not use or spray this product on aluminum, copper, silver products, or metal hardware to avoid surface oxidation. ◆ Do not use in conjunction with hydrochloric acid or acidic cleaning agents, and do not rinse with high-temperature hot water; doing so may release hazardous gases.

◆ Contact with the product may cause skin dryness; wearing gloves during use is recommended.

◆ Use in a well-ventilated area; wear a mask if desired.

◆ In case of accidental contact with eyes or open wounds, rinse immediately with plenty of water; seek medical attention if discomfort persists.

◆ Store in a cool place out of the reach of children; seek medical advice immediately if accidentally ingested.

◆ To achieve the foaming effect, this product must be used with the company's dedicated foam spray gun.

◆ Some materials may not be resistant to acidic or alkaline substances; verify material compatibility before use to prevent surface damage.